Sound Insulation Felt

Sound Insulation Felt

Soundproof felt is made of EPDM,material is light, thin, soft, tensile strength, black finish, coil packaging, easy construction, low cost, can be directly affixed to the wall or other materials surface.

Edit

Heavy-Mass Sound Barrier · Viscoelastic Vibration Damping

Sound Insulation Felt (High-Density Mass Loaded Barrier)

Mineral-Filled EPDM Matrix · Certified Airborne & Impact Sound Transmission Loss (Rw Up to 33 dB)

An ultra-thin, high-mass viscoelastic acoustic barrier engineered to block airborne noise transmission and decouple structural vibrations. Unlike porous absorbing panels that trap sound reflections, this dense EPDM membrane shifts the coincidence frequency and dampens wall resonance—delivering laboratory-proven transmission loss (Rw 24–33 dB) inside drywall assemblies, floating floors, and industrial machinery enclosures.

Direct Manufacturer Sourcing · China & Thailand Dual Production
• Thailand factory export completely bypasses US Section 301 tariffs (0% duty) · Standard 1.2mm / 2.0mm / 3.0mm master rolls · Reinforced palletized container loading.

🔇

High Acoustic Transmission Loss

High surface mass (up to 5.5 kg/m²) blocks airborne sound penetration, achieving standalone sound transmission loss ratings from Rw 24 dB to 33 dB.

〰️

Viscoelastic Vibration Damping

High internal mechanical loss factor suppresses low-frequency resonance in lightweight drywall, sheet metal ducts, and mechanical equipment shells.

📏

Ultra-Thin Space Optimization

Only 1.2mm to 3.0mm profile. Maximizes room usable square footage when sandwiched inside wall assemblies compared to bulky masonry barriers.

🛡️

Tear-Resistant & Flame Retardant

Exceptional tensile strength, water-resistant, aging-resistant, odorless, and formulated to satisfy commercial building fire retardancy standards.

Material Profile & Roll Packaging

Sound Insulation Felt Master Roll
Commercial Roll Format

Continuous roll lengths (5m to 10m) engineered for rapid unrolling and cutting with standard utility blades on the job site.

High Density EPDM Acoustic Barrier Texture
High-Density Viscoelastic Texture

Homogeneous composite matrix featuring fine mineral powder binders. Resilient against stretching, tearing, and puncture during stud fastening.

Standard Roll Specifications & Acoustic Ratings

ThicknessRoll DimensionsSurface DensitySound Transmission Loss (Rw)
1.2 mm10 m × 1.0 m (10 m² / roll)Approx. 2.0 – 2.4 kg / m²24 dB (ISO 10140 / ASTM E90)
2.0 mm10 m × 1.0 m (10 m² / roll)Approx. 3.6 – 4.0 kg / m²29 dB (ISO 10140 / ASTM E90)
3.0 mm5 m × 1.0 m (5 m² / roll)Approx. 5.5 – 6.0 kg / m²33 dB (ISO 10140 / ASTM E90)
Polymer BaseViscoelastic EPDM Synthetic Polymer with ultra-fine heavy mineral powder (Barite / Calcium Carbonate)
Fire RetardancyASTM E84 Class A (US Commercial Standard) / GB 8624 B1 / EN 13501-1 Class B
Operating Temperature-40°C to +100°C (maintains elasticity without embrittlement or sagging)
Environmental & OdorNon-toxic, odorless, low-VOC emission, free of asphalt, bitumens, lead, and unbonded fibers

Acoustic Assemblies & Installation Methods

1. Drywall Stud Partitions (Constrained-Layer Damping)

Interleaved between two layers of gypsum plasterboard or fastened directly across steel/wood studs. The barrier dampens drywall panel resonance, boosting total partition STC by 8 to 15 dB.

2. Floating Floor & Underlayment (Impact Damping)

Laid over structural subfloors beneath concrete screeds, hardwood planks, or laminate flooring to attenuate footstep impact noise (IIC) and structural vibration transfer.

3. Wastewater & HVAC Pipe Lagging

Wrapped around PVC plumbing lines, metal chilled water pipes, and rectangular air ducts. Effectively blocks turbulent water rush sounds and airflow whistling.

4. Equipment & Machine Enclosures

Adhered to the interior sheet-metal casing of air compressors, generators, stamping presses, and automotive cabins to eliminate drum-skin vibration and radiated noise.

Acoustic Engineering & Installation FAQ


Q: What is the difference between Sound Insulation Felt and Acoustic Absorbing Panels?


A: They serve complementary but distinct acoustic functions. Porous acoustic panels (such as PET felt or Akupanel) are designed for sound absorption (measured in NRC) to reduce echo inside a room. Sound insulation felt is a heavy mass barrier designed for sound transmission loss (measured in Rw / STC) to physically block noise from traveling through walls, floors, and ceilings into neighboring spaces.

Q: How does sandwiching 2.0mm insulation felt improve lightweight drywall partitions?


A: Standard gypsum drywall panels suffer from an acoustic coincidence dip (a frequency range where sound passes easily through the wall due to flexural resonance). Sandwiching our viscoelastic felt between two drywall sheets creates constrained-layer damping (CLD), flattening the resonance dip and increasing overall partition performance by 8 to 15 dB without doubling wall thickness.

Q: Is this material safe, odorless, and suitable for commercial HVAC and residential projects?


A: Yes. Our formulation utilizes food-grade/medical-grade synthetic EPDM polymer and natural mineral powder. It is completely free of volatile asphalt/tar additives, non-toxic, and odorless—making it fully compliant with indoor air quality standards (French VOC A+ and German AgBB criteria).

Q: Can North American contractors import these rolls tariff-free from your Thailand manufacturing facility?


A: Yes. All soundproofing rolls produced and dispatched from our Bangkok, Thailand facility are issued with legitimate Thai Certificates of Origin (COO), completely exempt from US Section 301 punitive tariffs.

Source Factory-Direct Sound Insulation Barrier Felt

Contact our acoustic engineering department for roll loading specs, lab transmission loss test curves, and Thailand export container schedules.


Request Factory Quotation & Samples

Edit
Edit
Edit

    QUOTE NOW